View Source ct_netconfc (common_test v1.27)
NETCONF client module.
NETCONF client module compliant with RFC 6241, NETCONF Configuration Protocol, and RFC 6242, Using the NETCONF Configuration Protocol over Secure SHell (SSH), and with support for RFC 5277, NETCONF Event Notifications.
Connecting to a NETCONF server
Call connect/1,2 to establish a connection to a server, then
pass the returned handle to session/1-3 to establish a NETCONF
session on a new SSH channel. Each call to session/1-3
establishes a new session on the same connection, and results in a hello message
to the server.
Alternately, open/1,2 can be used to establish a single session on
a dedicated connection. (Or, equivalently, only_open/1,2
followed by hello/1-3.)
Connect/session options can be specified in a configuration file with entries like the following.
{server_id(), [option()]}.The server_id/0 or an associated ct:target_name/0 can then be passed to
the aforementioned functions to use the referenced configuration.
Signaling
Protocol operations in the NETCONF protocol are realized as remote procedure
calls (RPCs) from client to server and a corresponding reply from server to
client. RPCs are sent using like-named functions (eg.
edit_config/3-5 to send an edit-config RPC), with the
server reply as return value. There are functions for each RPC defined in RFC
6241 and the create-subscription RPC from RFC 5277, all of which are wrappers on
send_rpc/2,3, that can be used to send an arbitrary RPC not
defined in RFC 6241 or RFC 5277.
All of the signaling functions have one variant with a Timeout argument and
one without, corresponding to an infinite timeout. The latter is inappropriate
in most cases since a non-response by the server or a missing message-id causes
the call to hang indefinitely.
Logging
The NETCONF server uses error_logger for logging of NETCONF traffic. A special
purpose error handler is implemented in ct_conn_log_h. To use this error
handler, add the cth_conn_log hook in the test suite, for example:
suite() ->
[{ct_hooks, [{cth_conn_log, [{ct:conn_log_mod(), ct:conn_log_options()}]}]}].conn_log_mod() is the name of the Common Test module implementing the
connection protocol, for example, ct_netconfc.
Hook option log_type specifies the type of logging:
raw- The sent and received NETCONF data is logged to a separate text file "as is" without any formatting. A link to the file is added to the test case HTML log.pretty- The sent and received NETCONF data is logged to a separate text file with XML data nicely indented. A link to the file is added to the test case HTML log.html (default)- The sent and received NETCONF traffic is pretty printed directly in the test case HTML log.silent- NETCONF traffic is not logged.
By default, all NETCONF traffic is logged in one single log file. However,
different connections can be logged in separate files. To do this, use hook
option hosts and list the names of the servers/connections to be used in the
suite. The connections must be named for this to work, that is, they must be
opened with open/2.
Option hosts has no effect if log_type is set to html or silent.
The hook options can also be specified in a configuration file with
configuration variable ct_conn_log:
{ct_conn_log,[{ct:conn_log_mod(), ct:conn_log_options()}]}.For example:
{ct_conn_log,[{ct_netconfc,[{log_type,pretty},
{hosts,[ct:key_or_name()]}]}]}Note
Hook options specified in a configuration file overwrite the hard-coded hook options in the test suite.
Logging Example 1:
The following ct_hooks statement causes pretty printing of NETCONF traffic to
separate logs for the connections named nc_server1 and nc_server2. Any other
connections are logged to default NETCONF log.
suite() ->
[{ct_hooks, [{cth_conn_log, [{ct_netconfc,[{log_type,pretty}},
{hosts,[nc_server1,nc_server2]}]}
]}]}].Connections must be opened as follows:
open(nc_server1,[...]),
open(nc_server2,[...]).Logging Example 2:
The following configuration file causes raw logging of all NETCONF traffic in to one single text file:
{ct_conn_log,[{ct_netconfc,[{log_type,raw}]}]}.The ct_hooks statement must look as follows:
suite() ->
[{ct_hooks, [{cth_conn_log, []}]}].The same ct_hooks statement without the configuration file would cause HTML
logging of all NETCONF connections in to the test case HTML log.
Summary
Types
Handle to a NETCONF session, as required by signaling functions.
Handle to a connection to a NETCONF server as returned by
connect/1,2, or to a session as returned by
session/1-3, open/1,2, or
only_open/1,2.
Event notification messages sent as a result of calls to
create_subscription/2,3.
Options host and port specify the server endpoint to which to connect, and
are passed directly to ssh:connect/4, as are arbitrary ssh
options. Common options are user, password and user_dir.
Identity of connection or session configuration in a configuration file.
Representation of XML, as described in application
xmerl.
Stream information as returned by
get_event_streams/1-3. See RFC 5277, "XML Schema for
Event Notifications", for detail on the format of the string values.
Date and time of a startTime/stopTime element in an RFC 5277 create-subscription
request. Of XML primitive type dateTime, which has the (informal) form
Functions
Equivalent to action/3.
Executes an action. If the return type is void, ok is returned instead of
{ok,[simple_xml()]}.
Equivalent to close_session/2.
Requests graceful termination of the session associated with the client.
Opens an SSH connection to a NETCONF server.
Open an SSH connection to a named NETCONF server.
Equivalent to copy_config/4.
Copies configuration data.
Equivalent to create_subscription/3.
Creates a subscription for event notifications by sending an RFC 5277
create-subscription RPC to the server. The calling process receives events as
messages of type notification/0.
Equivalent to delete_config/3.
Deletes configuration data.
Closes the given SSH connection.
Equivalent to edit_config/5.
Equivalent to edit_config/5.
Edits configuration data.
Equivalent to get/3.
Gets data.
Equivalent to get_capabilities/2.
Returns the server capabilities as received in its hello message.
Equivalent to get_config/4.
Gets configuration data.
Equivalent to get_event_streams/3.
Equivalent to get_event_streams/3.
Sends a request to get the specified event streams.
Equivalent to get_session_id/2.
Returns the session Id associated with the specified client.
Equivalent to hello/3.
Equivalent to hello/3.
Exchanges hello messages with the server. Returns when the server hello has
been received or after the specified timeout.
Equivalent to kill_session/3.
Forces termination of the session associated with the supplied session Id.
Equivalent to lock/3.
Locks the configuration target.
Opens a NETCONF session, but does not send hello.
Opens a named NETCONF session, but does not send hello.
Opens a NETCONF session and exchanges hello messages.
Opens a named NETCONF session and exchanges hello messages.
Equivalent to send/3.
Sends an XML document to the server.
Equivalent to send_rpc/3.
Sends a NETCONF rpc request to the server.
Equivalent to session/3.
Opens a NETCONF session as a channel on the given SSH connection, and exchanges hello messages with the server.
Equivalent to unlock/3.
Unlocks the configuration target.
Types
-type client() :: handle() | server_id() | ct:target_name().
Handle to a NETCONF session, as required by signaling functions.
-type error_reason() :: term().
-opaque handle()
Handle to a connection to a NETCONF server as returned by
connect/1,2, or to a session as returned by
session/1-3, open/1,2, or
only_open/1,2.
-type host() :: inet:hostname() | inet:ip_address().
-type netconf_db() :: running | startup | candidate.
-type notification() :: {notification, xml_attributes(), [simple_xml()]}.
Event notification messages sent as a result of calls to
create_subscription/2,3.
-type option() :: {host | ssh, host()} | {port, inet:port_number()} | {timeout, timeout()} | {capability, string() | [string()]} | {receiver, term()} | ssh:client_option().
Options host and port specify the server endpoint to which to connect, and
are passed directly to ssh:connect/4, as are arbitrary ssh
options. Common options are user, password and user_dir.
Option timeout specifies the number of milliseconds to allow for connection
establishment and, if the function in question results in an outgoing hello
message, reception of the server hello. The timeout applies to connection and
hello independently; one timeout for connection establishment, another for hello
reception.
Option receiver specifies a destination for incoming notification messages; a
left operand of the send operator (!). If not specified then a process calling
create_subscription/2,3 becomes the receiver, but
explicitly setting a receiver makes it possible to receive notifications that
are not ordered by calling this function. Multiple receiver options can be
specified.
Receiver options are ignored by connect/1-3.
Option capability specifies the content of a corresponding element in an
outgoing hello message, each option specifying the content of a single element.
If no base NETCONF capability is configured then the RFC 4741 1.0 capability,
"urn:ietf:params:netconf:base:1.0", is added, otherwise not. In particular, the
RFC 6241 1.1 capability must be explicitly configured. NETCONF capabilities can
be specified using the shorthand notation defined in RFC 6241, any capability
string starting with a colon being prefixed by either "urn:ietf:params:netconf"
or "urn:ietf:params:netconf:capability", as appropriate.
Capability options are ignored by connect/1-3 and only_open/1-2, which don't result in an outgoing hello message.
-type server_id() :: atom().
Identity of connection or session configuration in a configuration file.
-type simple_xml() :: {xml_tag(), xml_attributes(), xml_content()} | {xml_tag(), xml_content()} | xml_tag().
Representation of XML, as described in application
xmerl.
-type stream_name() :: string().
-type streams() :: [{stream_name(), [stream_data()]}].
Stream information as returned by
get_event_streams/1-3. See RFC 5277, "XML Schema for
Event Notifications", for detail on the format of the string values.
-type xml_attribute_tag() :: atom().
-type xml_attribute_value() :: string().
-type xml_attributes() :: [{xml_attribute_tag(), xml_attribute_value()}].
-type xml_content() :: [simple_xml() | iolist()].
-type xml_tag() :: atom().
-type xpath() :: {xpath, string()}.
-type xs_datetime() :: string().
Date and time of a startTime/stopTime element in an RFC 5277 create-subscription
request. Of XML primitive type dateTime, which has the (informal) form
[-]YYYY-MM-DDThh:mm:ss[.s][Z|(+|-)hh:mm]where T and Z are literal and .s is one or more fractional seconds.
Functions
-spec action(Client, Action) -> Result when Client :: client(), Action :: simple_xml(), Result :: ok | {ok, [simple_xml()]} | {error, error_reason()}.
Equivalent to action/3.
-spec action(Client, Action, Timeout) -> Result when Client :: client(), Action :: simple_xml(), Timeout :: timeout(), Result :: ok | {ok, [simple_xml()]} | {error, error_reason()}.
Executes an action. If the return type is void, ok is returned instead of
{ok,[simple_xml()]}.
-spec close_session(Client) -> Result when Client :: client(), Result :: ok | {error, error_reason()}.
Equivalent to close_session/2.
-spec close_session(Client, Timeout) -> Result when Client :: client(), Timeout :: timeout(), Result :: ok | {error, error_reason()}.
Requests graceful termination of the session associated with the client.
When a NETCONF server receives a close-session request, it gracefully closes
the session. The server releases any locks and resources associated with the
session and gracefully closes any associated connections. Any NETCONF requests
received after a close-session request are ignored.
-spec connect(Options) -> Result when Options :: [option()], Result :: {ok, handle()} | {error, error_reason()}.
Opens an SSH connection to a NETCONF server.
If the server options are specified in a configuration file, use connect/2
instead.
The opaque handle/0 reference returned from this function is required as
connection identifier when opening sessions over this connection, see
session/1-3.
-spec connect(KeyOrName, ExtraOptions) -> Result when KeyOrName :: ct:key_or_name(), ExtraOptions :: [option()], Result :: {ok, handle()} | {error, error_reason()}.
Open an SSH connection to a named NETCONF server.
If KeyOrName is a configured server_id/0 or a target_name() associated
with such an Id, then the options for this server are fetched from the
configuration file.
The options list is added to those of the configuration file. If an option is specified in both lists, the configuration file takes precedence.
If the server is not specified in a configuration file, use connect/1 instead.
The opaque handle/0 reference returned from this function can be used as
connection identifier when opening sessions over this connection, see
session/1-3. However, if KeyOrName is a target_name(), that
is, if the server is named through a call to ct:require/2 or a require
statement in the test suite, then this name can be used instead of handle/0.
-spec copy_config(Client, Target, Source) -> Result when Client :: client(), Target :: netconf_db(), Source :: netconf_db(), Result :: ok | {error, error_reason()}.
Equivalent to copy_config/4.
-spec copy_config(Client, Target, Source, Timeout) -> Result when Client :: client(), Target :: netconf_db(), Source :: netconf_db(), Timeout :: timeout(), Result :: ok | {error, error_reason()}.
Copies configuration data.
Which source and target options that can be issued depends on the capabilities
supported by the server. That is, :candidate and/or :startup are required.
-spec create_subscription(Client, Values) -> Result when Client :: client(), Values :: #{stream => Stream, filter => Filter, start => StartTime, stop => StopTime}, Stream :: stream_name(), Filter :: simple_xml() | [simple_xml()], StartTime :: xs_datetime(), StopTime :: xs_datetime(), Result :: ok | {error, error_reason()}; (Client, list() | timeout()) -> Result when Client :: client(), Result :: ok | {error, error_reason()}.
Equivalent to create_subscription/3.
-spec create_subscription(Client, Values, Timeout) -> Result when Client :: client(), Values :: #{stream => Stream, filter => Filter, start => StartTime, stop => StopTime}, Stream :: stream_name(), Filter :: simple_xml() | [simple_xml()], StartTime :: xs_datetime(), StopTime :: xs_datetime(), Timeout :: timeout(), Result :: ok | {error, error_reason()}; (Client, list(), list() | timeout()) -> Result when Client :: client(), Result :: ok | {error, error_reason()}.
Creates a subscription for event notifications by sending an RFC 5277
create-subscription RPC to the server. The calling process receives events as
messages of type notification/0.
From RFC 5722, 2.1 Subscribing to Receive Event Notifications:
Stream- Indicates which stream of event is of interest. If not present, events in the default NETCONF stream are sent.Filter- Indicates which subset of all possible events is of interest. The parameter format is the same as that of the filter parameter in the NETCONF protocol operations. If not present, all events not precluded by other parameters are sent.StartTime- Used to trigger the replay feature and indicate that the replay is to start at the time specified. IfStartTimeis not present, this is not a replay subscription. It is not valid to specify start times that are later than the current time. IfStartTimeis specified earlier than the log can support, the replay begins with the earliest available notification. This parameter is of typedateTimeand compliant to RFC 3339. Implementations must support time zones.StopTime- Used with the optional replay feature to indicate the newest notifications of interest. IfStopTimeis not present, the notifications continues until the subscription is terminated. Must be used with and be later thanStartTime. Values ofStopTimein the future are valid. This parameter is of typedateTimeand compliant to RFC 3339. Implementations must support time zones.
See RFC 5277 for more details. The requirement that StopTime must only be used
with StartTime is not enforced, to allow an invalid request to be sent to the
server.
Prior to OTP 22.1, this function was documented as having 15 variants in 6 arities. These are still exported for backwards compatibility, but no longer documented. The map-based variants documented above provide the same functionality with simpler arguments.
Note
create-subscription is no longer the only RPC with which NETCONF notifications can be ordered: RFC 8639 adds establish-subscription and future RFCs may add other methods. Specify a
receiveroption at session creation to provide a destination for incoming notifications independently of a call tocreate_subscription/2,3, and usesend_rpc/2,3to send establish-subscription and other arbitrary RPCs.
-spec delete_config(Client, Target) -> Result when Client :: client(), Target :: startup | candidate, Result :: ok | {error, error_reason()}.
Equivalent to delete_config/3.
-spec delete_config(Client, Target, Timeout) -> Result when Client :: client(), Target :: startup | candidate, Timeout :: timeout(), Result :: ok | {error, error_reason()}.
Deletes configuration data.
The running configuration cannot be deleted and :candidate or :startup must
be advertised by the server.
-spec disconnect(Conn) -> ok | {error, error_reason()} when Conn :: handle().
Closes the given SSH connection.
If there are open NETCONF sessions on the connection, these will be brutally
aborted. To avoid this, close each session with
close_session/1,2
-spec edit_config(Client, Target, Config) -> Result when Client :: client(), Target :: netconf_db(), Config :: simple_xml() | [simple_xml()], Result :: ok | {error, error_reason()}.
Equivalent to edit_config/5.
-spec edit_config(Client, Target, Config, OptParams) -> Result when Client :: client(), Target :: netconf_db(), Config :: simple_xml() | [simple_xml()], OptParams :: [simple_xml()], Result :: ok | {error, error_reason()}; (Client, Target, Config, Timeout) -> Result when Client :: client(), Target :: netconf_db(), Config :: simple_xml(), Timeout :: timeout(), Result :: ok | {error, error_reason()}.
Equivalent to edit_config/5.
edit_config(Client, Target, Config, OptParams, Timeout)
View Source (since OTP 18.0)-spec edit_config(Client, Target, Config, OptParams, Timeout) -> Result when Client :: client(), Target :: netconf_db(), Config :: simple_xml() | [simple_xml()], OptParams :: [simple_xml()], Timeout :: timeout(), Result :: ok | {error, error_reason()}.
Edits configuration data.
By default only the running target is available, unless the server includes
:candidate or :startup in its list of capabilities.
OptParams can be used for specifying optional parameters (default-operation,
test-option, or error-option) to be added to the edit-config request. The
value must be a list containing valid simple XML, for example:
[{'default-operation', ["none"]},
{'error-option', ["rollback-on-error"]}]If OptParams is not given, the default value [] is used.
-spec get(Client, Filter) -> Result when Client :: client(), Filter :: simple_xml() | xpath(), Result :: {ok, [simple_xml()]} | {error, error_reason()}.
Equivalent to get/3.
-spec get(Client, Filter, Timeout) -> Result when Client :: client(), Filter :: simple_xml() | xpath(), Timeout :: timeout(), Result :: {ok, [simple_xml()]} | {error, error_reason()}.
Gets data.
This operation returns both configuration and state data from the server.
Filter type xpath can be used only if the server supports :xpath.
-spec get_capabilities(Client) -> Result when Client :: client(), Result :: [string()] | {error, error_reason()}.
Equivalent to get_capabilities/2.
-spec get_capabilities(Client, Timeout) -> Result when Client :: client(), Timeout :: timeout(), Result :: [string()] | {error, error_reason()}.
Returns the server capabilities as received in its hello message.
-spec get_config(Client, Source, Filter) -> Result when Client :: client(), Source :: netconf_db(), Filter :: simple_xml() | xpath(), Result :: {ok, [simple_xml()]} | {error, error_reason()}.
Equivalent to get_config/4.
-spec get_config(Client, Source, Filter, Timeout) -> Result when Client :: client(), Source :: netconf_db(), Filter :: simple_xml() | xpath(), Timeout :: timeout(), Result :: {ok, [simple_xml()]} | {error, error_reason()}.
Gets configuration data.
To be able to access another source than running, the server must advertise
:candidate and/or :startup.
Filter type xpath can be used only if the server supports :xpath.
-spec get_event_streams(Client) -> Result when Client :: client(), Result :: {ok, streams()} | {error, error_reason()}.
Equivalent to get_event_streams/3.
-spec get_event_streams(Client, Timeout) -> Result when Client :: client(), Timeout :: timeout(), Result :: {ok, streams()} | {error, error_reason()}; (Client, Streams) -> Result when Client :: client(), Streams :: [stream_name()], Result :: {ok, streams()} | {error, error_reason()}.
Equivalent to get_event_streams/3.
-spec get_event_streams(Client, Streams, Timeout) -> Result when Client :: client(), Streams :: [stream_name()], Timeout :: timeout(), Result :: {ok, streams()} | {error, error_reason()}.
Sends a request to get the specified event streams.
Streams is a list of stream names. The following filter is sent to the NETCONF
server in a get request:
<netconf xmlns="urn:ietf:params:xml:ns:netmod:notification">
<streams>
<stream>
<name>StreamName1</name>
</stream>
<stream>
<name>StreamName2</name>
</stream>
...
</streams>
</netconf>If Streams is an empty list, all streams are requested by sending the
following filter:
<netconf xmlns="urn:ietf:params:xml:ns:netmod:notification">
<streams/>
</netconf>If more complex filtering is needed, use ct_netconfc:get/2,3 and
specify the exact filter according to "XML Schema for Event Notifications" in
RFC 5277.
-spec get_session_id(Client) -> Result when Client :: client(), Result :: pos_integer() | {error, error_reason()}.
Equivalent to get_session_id/2.
-spec get_session_id(Client, Timeout) -> Result when Client :: client(), Timeout :: timeout(), Result :: pos_integer() | {error, error_reason()}.
Returns the session Id associated with the specified client.
-spec hello(Client) -> Result when Client :: handle(), Result :: ok | {error, error_reason()}.
Equivalent to hello/3.
-spec hello(Client, Timeout) -> Result when Client :: handle(), Timeout :: timeout(), Result :: ok | {error, error_reason()}.
Equivalent to hello/3.
-spec hello(Client, Options, Timeout) -> Result when Client :: handle(), Options :: [{capability, [string()]}], Timeout :: timeout(), Result :: ok | {error, error_reason()}.
Exchanges hello messages with the server. Returns when the server hello has
been received or after the specified timeout.
Note that capabilities for an outgoing hello can be passed directly to open/2.
-spec kill_session(Client, SessionId) -> Result when Client :: client(), SessionId :: pos_integer(), Result :: ok | {error, error_reason()}.
Equivalent to kill_session/3.
-spec kill_session(Client, SessionId, Timeout) -> Result when Client :: client(), SessionId :: pos_integer(), Timeout :: timeout(), Result :: ok | {error, error_reason()}.
Forces termination of the session associated with the supplied session Id.
The server side must abort any ongoing operations, release any locks and resources associated with the session, and close any associated connections.
Only if the server is in the confirmed commit phase, the configuration is restored to its state before entering the confirmed commit phase. Otherwise, no configuration rollback is performed.
If the specified SessionId is equal to the current session Id, an error is
returned.
-spec lock(Client, Target) -> Result when Client :: client(), Target :: netconf_db(), Result :: ok | {error, error_reason()}.
Equivalent to lock/3.
-spec lock(Client, Target, Timeout) -> Result when Client :: client(), Target :: netconf_db(), Timeout :: timeout(), Result :: ok | {error, error_reason()}.
Locks the configuration target.
Which target parameters that can be used depends on if :candidate and/or
:startup are supported by the server. If successful, the configuration system
of the device is unavailable to other clients (NETCONF, CORBA, SNMP, and so on).
Locks are intended to be short-lived.
Operation kill_session/2,3 can be used to force the
release of a lock owned by another NETCONF session. How this is achieved by the
server side is implementation-specific.
-spec only_open(Options) -> Result when Options :: [option()], Result :: {ok, handle()} | {error, error_reason()}.
Opens a NETCONF session, but does not send hello.
As open/1, but does not send a hello message.
-spec only_open(KeyOrName, ExtraOptions) -> Result when KeyOrName :: ct:key_or_name(), ExtraOptions :: [option()], Result :: {ok, handle()} | {error, error_reason()}.
Opens a named NETCONF session, but does not send hello.
As open/2, but does not send a hello message.
-spec open(Options) -> Result when Options :: [option()], Result :: {ok, handle()} | {error, error_reason()}.
Opens a NETCONF session and exchanges hello messages.
If the server options are specified in a configuration file, or if a named
client is needed for logging purposes (see section
Logging in this module), use open/2 instead.
The opaque handle/0 reference returned from this function is required as
client identifier when calling any other function in this module.
-spec open(KeyOrName, ExtraOption) -> Result when KeyOrName :: ct:key_or_name(), ExtraOption :: [option()], Result :: {ok, handle()} | {error, error_reason()}.
Opens a named NETCONF session and exchanges hello messages.
If KeyOrName is a configured server_id/0 or a target_name() associated
with such an Id, then the options for this server are fetched from the
configuration file.
The options list is added to those of the configuration file. If an option is specified in both lists, the configuration file take precedence.
If the server is not specified in a configuration file, use open/1 instead.
The opaque handle/0 reference returned from this function can be used as
client identifier when calling any other function in this module. However, if
KeyOrName is a target_name(), that is, if the server is named through a call
to ct:require/2 or a require statement in the test suite, then this name can
be used instead of handle/0.
See also ct:require/2.
-spec send(Client, SimpleXml) -> Result when Client :: client(), SimpleXml :: simple_xml(), Result :: simple_xml() | {error, error_reason()}.
Equivalent to send/3.
-spec send(Client, SimpleXml, Timeout) -> Result when Client :: client(), SimpleXml :: simple_xml(), Timeout :: timeout(), Result :: simple_xml() | {error, error_reason()}.
Sends an XML document to the server.
The specified XML document is sent "as is" to the server. This function can be used for sending XML documents that cannot be expressed by other interface functions in this module.
-spec send_rpc(Client, SimpleXml) -> Result when Client :: client(), SimpleXml :: simple_xml(), Result :: [simple_xml()] | {error, error_reason()}.
Equivalent to send_rpc/3.
-spec send_rpc(Client, SimpleXml, Timeout) -> Result when Client :: client(), SimpleXml :: simple_xml(), Timeout :: timeout(), Result :: [simple_xml()] | {error, error_reason()}.
Sends a NETCONF rpc request to the server.
The specified XML document is wrapped in a valid NETCONF rpc request and sent
to the server. The message-id and namespace attributes are added to element
rpc.
This function can be used for sending rpc requests that cannot be expressed by
other interface functions in this module.
-spec session(Conn) -> Result when Conn :: handle(), Result :: {ok, handle()} | {error, error_reason()}.
Equivalent to session/3.
-spec session(Conn, Options) -> Result when Conn :: handle(), Options :: [session_option()], Result :: {ok, handle()} | {error, error_reason()}; (KeyOrName, Conn) -> Result when KeyOrName :: ct:key_or_name(), Conn :: handle(), Result :: {ok, handle()} | {error, error_reason()}.
Equivalent to session/3.
-spec session(KeyOrName, Conn, Options) -> Result when Conn :: handle(), Options :: [session_option()], KeyOrName :: ct:key_or_name(), Result :: {ok, handle()} | {error, error_reason()}.
Opens a NETCONF session as a channel on the given SSH connection, and exchanges hello messages with the server.
The opaque handle/0 reference returned from this function can be used as
client identifier when calling any other function in this module. However, if
KeyOrName is used and it is a target_name(), that is, if the server is named
through a call to ct:require/2 or a require statement in the test suite,
then this name can be used instead of handle/0.
-spec unlock(Client, Target) -> Result when Client :: client(), Target :: netconf_db(), Result :: ok | {error, error_reason()}.
Equivalent to unlock/3.
-spec unlock(Client, Target, Timeout) -> Result when Client :: client(), Target :: netconf_db(), Timeout :: timeout(), Result :: ok | {error, error_reason()}.
Unlocks the configuration target.
If the client earlier has acquired a lock through lock/2,3, this
operation releases the associated lock. To access another target than running,
the server must support :candidate and/or :startup.